Back to list
Skywire Development Update — November 11, 2026
The eleventh of November was the busiest day of the month so far, with over a hundred pull requests merged across Skywire, Skycoin and the website. Most of them port web interfaces to server rendered pages built with templ and htmx. The hypervisor’s new interface at /ui2 gained nearly every page of the Angular one, the Skycoin wallet’s did the same, the explorer switched over and became the default, and the skydex client started its own port. Underneath that, the router kept tidying its multipath legs, dmsg learned to say why a stream was refused, and the Android app took a long run of fixes from testers.
Skywire: The Hypervisor at /ui2
6135 starts with a parity table that lists every page, tab and action of the Angular hypervisor interface against what /ui2 has, and each port after it fills one area and updates the table. The visor list gained labels, removal of offline visors, filters and sorting in 6136, then row selection with bulk restart, reward address and app actions in 6139, which go through the same handlers as the Angular dialogs. 6141 adds the settings page with password change and labels, and both interfaces keep their browser side settings under the same keys, so they agree. 6142 brings the app catalog and a flags form checked against the autoconfig value rules, and 6161 the apps list’s filter and bulk start, stop and autostart.
Whole pages followed. 6144 adds deployment service health and the route setup node stats, 6145 every visor’s host resources, 6147 the uptime of every visor, 6156 the network view of over a thousand visors, 6157 the network wide transport metrics, and 6158 a rewards view of the managed visors. 6151 adds per transport bandwidth for a visor, paged because a busy visor holds thousands of transports, and 6159 transport labels and details. 6163 adds the history charts for resources and versions.
The app tabs came over one by one. 6150 replaces the chat tab’s embedded Angular page with a native one for direct messages and rooms, and 6165 adds the skychat password and room states. 6153 adds the web proxy tab, 6154 the skynet tab with forwarded ports and reverse proxies, 6155 the VPN tab and 6164 its server picker, 6162 the offline alert settings, and 6148 frames the Skycoin wallet’s own /ui2 in the wallet tab. Each port was checked against the development hypervisor, read only where a write would have disturbed a running visor, with handler tests covering the writes. 6140 fixed a lint finding from the list work.
Skycoin: The Wallet, the Explorer and skydex
The Skycoin wallet’s /ui2 closed most of its gap with the Angular wallet the same way, starting from its own parity table in skycoin#3252. It gained a history page for every wallet in skycoin#3253, wallet options for node wallets in skycoin#3254, settings, backup, outputs and pending pages in skycoin#3255, and password reset, temporary loading and seed passphrases in skycoin#3257. skycoin#3256 fixed the API underneath, which dropped the seed passphrase when loading a temporary wallet, so a passphrase wallet came up as a different empty one in both interfaces.
Unsigned and joint transactions arrived in skycoin#3258, sends to several destinations, from chosen sources and in bulk in skycoin#3259, and QR codes and payment links in skycoin#3260. Wallets kept in the browser caught up through skycoin#3261, skycoin#3264 and skycoin#3265, which sign in the page and never post anything secret. skycoin#3262 adds the node warnings under the top bar, skycoin#3263 BIP44 accounts, skycoin#3266 a cached history for when the node is down, skycoin#3267 QR scanning from the camera or an image, and skycoin#3268 the multi-coin pages for Bitcoin, Ethereum and ERC-20 tokens. The Angular wallet stays the default until the table is done.
The explorer was an Angular app, so search engines and readers without JavaScript got an empty page. skycoin#3248 and skycoin#3250 render every page on the server, each with a title, description and canonical link, and skycoin#3251 makes that the default at the old URLs, with the Angular explorer kept at /classic/ for one release. Along the way the address page learned to show whether an address has sent coins in skycoin#3245, which lets reward operators check their address, and the rich list now pages through every address with its decimal points lined up in skycoin#3246. skycoin#3247 pages the rich list on the node itself, built once per block instead of on every request, and skycoin#3249 updated the end to end specs.
The skydex client began its port in skycoin#3269 and finished it the same day with the market tab in skycoin#3270, orders and listings in skycoin#3271 and history in skycoin#3273, with a formatting fix in skycoin#3272, so every React tab now has a /ui2 counterpart. skycoin#3274 closes a cross-site hole in its control API, where a page visited while the client ran could buy, list or cancel through it. 6129, 6131, 6132, 6138, 6152, 6160, 6167 and 6171 brought all of this into Skywire.
Skywire: Mux Legs and Range Requests
The leg refactor from the day before reached its third stage. 6116 keeps a mux leg’s counters, readiness, standby flag and bottleneck group in one record with its transport ID, in place of four lists kept in step by hand. Traffic was credited through an index taken before the write, so a removal during the write credited the bytes to another leg, and that is gone with it. 6117 drops a leg’s park time, delay estimate and latency when it leaves, where before a later leg on the same transport inherited them. 6111 tells the peer when a parked leg becomes the primary, so both ends agree on which legs are active.
Two fixes went into the proxy’s range splitting, which fetches parts of one download over several tunnels. 6114 retries a chunk at once when its tunnel connection fails a write, where a narrow window in yamux had charged it a retry and a backoff. 6119 keeps one route from carrying more than its share of an object when no tunnel was eligible, which had let a tunnel over its cap win while an unmeasured standby sat out.
Skywire: dmsg Refusals and a Parked Frame
A dmsg dial to a key with no session, or to a port with no listener, used to fail with a bare EOF that looked the same as a dropped connection. 6113 has the server answer its own client’s refused request with the dmsg error code, signed with the server’s key, and 6115 has the destination answer a request for a port it does not listen on with error 306, signed with its own key, which a forwarding server passes on unchanged. 6122 fixed a refusal test that raced the server listing its sessions.
A hypervisor can leave changes for an offline visor as recorded RPC frames, checked against an allow list when the visor comes back. The visor checked only the first request in a frame, so a second request in the same frame was served unchecked. Only a configured hypervisor can leave a change, so this bypassed the allow list and nothing more, and 6112 now requires exactly one request per frame.
Skywire Mobile
Testers’ reports kept the Android app busy. 6123 keeps a full open chat at its newest message, 6124 switches tabs at once on a tap and slides only on a swipe, 6125 counts the SkyChat badge the way the chat rows do, and 6126 translates the unanswered call and join request texts. 6127 builds a group backup in the cache and checks it before copying it out, after the first tries came out empty or corrupt, and 6130 clears a mail notification once the mail is read. 6166 finds the wallet addresses that the reward system pays past the ones a wallet already holds, and 6170 says when the phone has no internet while the core starts, instead of spinning on Starting.
SkyMail dates now show in the phone’s time zone through 6168, the compose screen shows the sent size of attachments against the limit in 6169, and 6176 gives a mail send ten minutes, after a 7 MB attachment failed at the two minute bound every mailbox call used. 6172 stops the SkyVPN screen from restarting a running tunnel, and 6173 and 6174 try the exported tether settings activity for the hotspot button, which was not verified on the reporters’ phones. On the visor side, 6110 checks /data for storage on Android, where the read-only system image had raised false warnings, 6109 reuses skychat’s saved proxy token so a password protected chat page survives a restart, and 6128 scans groups for role and roster changes every second, which cut the delay a member saw from about 16 seconds to 4. 6134 adds the changelog for Skywire v1.3.110, released that afternoon, and the notes for Skywire Mobile 0.0.11.
Skywire: CI, Rewards and the Website
Continuous integration got faster. 6133 keeps the Go build caches inside the repository’s cache quota, after the caches grew on every push until GitHub evicted one lane’s and its tests ran uncached. 6143 stops a deployment host from waiting at boot for services it hosts itself, which cost a minute, 6146 drops two fixed waits that made up most of the restart test’s 170 seconds, and 6149 compiles the end to end binaries on the runner with a warm cache. 6175 fixed a double close in transports that panicked the router tests.
On the reward side, 6137 fetches uptime data over dmsg in the reward cycle, and 6118, 6120 and 6121 repaired dead links in the rules and history pages. On skycoin.com, skycoin.com#89 links the Skywire v1.3.109 release on the downloads page, skycoin.com#88 adds the notice that Skycoin is unrelated to the Maker token renamed SKY, and skycoin.com#87 fixes an image and two links in the CX pages.